Home | Reports | Technical Documents | Tech-Blog | One-Shot Gallery | Korea ICT News | Korea Communication Market Data | List of Contributors | Become a Contributor |    
 
 
Section 5G 4G LTE C-RAN/Fronthaul Gigabit Internet IPTV/Video Streaming IoT SDN/NFV Wi-Fi KT SK Telecom LG U+ Network Protocol Samsung   Korean Vendors
 
Real World Private 5G Cases   4 Deployment Models On-Premise Cases 5G Core Control Plane Sharing Cases

5G Core Sharing Cases

   
 
Private 5G Deployment   • Private 5G Frequency Allocation Status in Korea  South Korean government's regulations on private 5G and KT's strategy for entering the market
Cases in Korea   Private 5G Operators |   SK Networks Service (SI) Sejong Telecom (Wire-line Carrier) KT MOS (Affiliate of KT) • Newgens (SI) • NAVER Cloud more >>  
    Enterprise DIY |   Korea Hydro & Nuclear Power (Power Plant) Korea Electric Power Corporation (Energy) • Republic of Korea Navy more >>
 
CHANNELS     HFR Private 5G Solution (my5G)       my5G Solution Components       my5G Key Features        my5G Resources        my5G News          
 
banner
banner
LTE IP Address Allocation Schemes I: Basic
February 13, 2015 | By Netmanias (tech@netmanias.com)
Online viewer:
Comments (23)
32
SUMMARY
This document will describe how an LTE network allocates IP addresses to users accessing the network. IP addresses can be either dynamic or static depending on their allocators. Below we will discuss how the two types are different, and how they are allocated.
Page 1 of 5
 

 

1. Introduction

 

LTE networks are all-IP networks. This means that they deliver all user traffic in IP packets, and provide users with “always-on IP connectivity”. When UE joins an LTE network, a Packet Data Network (PDN) address (i.e. the one that can be used in the PDN) is assigned to the UE for its connection to the PDN, and a default bearer is established in the LTE network (i.e. between UE and P-GW). This default bearer remains connected (i.e. the IP address assigned to the UE during the initial attach remains valid) until the UE is detached from the LTE network.


A default bearer is established for each APN (Access Point Name)1 a user has, and thus a unique IP address is assigned for each APN. An IP address can be an IPv4, IPv6 or IPv4/IPv6 type.

 

This document will explain how an LTE network allocates an IP address to a user (i.e. UE) when the user initially attaches to the network, by giving an example of a case where UE uses only one PDN, the Internet, and an IPv4 type address is assigned to the UE.

 

Two different types of IP address allocation will be discussed in this and next documents. This document will cover the basic IP address allocation schemes and procedures, describing how IP addresses are allocated to a user who, while staying in one place, is performing initial attach to the network multiple times (e.g. by turning off UE and then back on). The next document will look into different ways of IP address allocation in case a user performs initial attach from two geographically-separated locations (e.g. City A and City B).

 

This document is organized as follows:

 

In Chapter 2, different types of IP address allocation – dynamic and static - and their characteristics will be discussed.

Chapters 3 and 4 will provide the detailed explanation of the dynamic and static IP address allocation procedures, respectively.

 

 

Page 1 of 5
Sachidananda 2015-02-13 23:14:02

Hello Team, Thanks for Superb and Detailed Explantion , I am unable to find part 2 of this document , can you provide the link for it.

 

 

Thanks

Kshirod 2015-02-15 13:26:05

Do we have part-2 please upload it.

I am great fan of this site.
I am sure all the documnet we have now in EPC side.
Can we put something in air interface side.

Following is the over protocal sequence being exchanged between UE and Network. Actually understanding all the details of these steps would be the goal of your whole LTE career.

1) <Cell Search and Detection>
2) MIB
3) SIB 1
4) <Check Cell Selection Criteria>
5) SIB 2 and other SIBs
6) RRC : PRACH Preamble
7) RRC : RACH Response   
8) RRC : RRC Connection Request
9) RRC : RRC Connection Setup

>>>>> Can we put something how 1-7 works.
      I mean what happens when somebody switchon the mobile.What happens in air interface side.
    Like cell search and RACH procedure.

10-14 is coverred in attach procedure.
 
10) RRC : RRC Connection Setup Complete + NAS : Attach Request + ESM : PDN Connectivity Request
11) RRC : DL Information Transfer + NAS : Authentication Request
12) RRC : UL Information Transfer + NAS : Authentication Response
13) RRC : DL Information Transfer + NAS : Security Mode Command
14) RRC : UL Information Transfer + NAS : Security Mode Complete

 

I am Kshirod and you can reach me in softkshirod@gmail.com

ZG 2015-02-24 05:29:48

I have 2 quick questions:

  1. APN has been shown as part of PDN. Is this correct or should it be part of P-GW?
  2. The above document is using IPv4. Would the procedure remain the same for IPv4v6 and IPv6. It seems that for IPv6 addressing, the UE can dynamically generate it's own IP addresses. Not absolutely certain though.
Dieter Busch 2015-07-10 16:37:12

A question on the sequence diagram differences of of fixed and dynamic address allocation:

 

In dynamic alloc. step 2 points to SGW whereas for static step 2 points to HSS. I do not quite understand if and how the MME distinguishes what to do. Is there just a shortcut in the dynamic sequence diagram? -meaning: the update location request and answers are also part in the complete diagram for dynamic, but these were skipped in the picture?

버너 2015-07-15 13:10:06

To Dieter Busch : 

When UE send "initial attach request" to MME, UE also includes GUTI (unique id of each MME) information within "initial attach request". 

After receiving "IAR" from UE, MME checks GUTI and

 - send ULR to HSS if GUTI is different with MME's own 

 - send CSR to SGW if GUTI is same as MME's own 

pls check "Figure 5.3.2.1-1" in TS.23.401 for more explanation 


To Netmanias : 

Please comment more detailly, example call flow has a potential to make a misunderstanding. 

ULR/ULA also can happen in "dynamic IP allocation" scenario. (in this case, HSS does not return any IP address information to MME)

gecuili 2016-03-17 16:15:42

To Dieter Busch,

in ts 23.401, ULR is sent when in following cases:

"If the MME has changed since the last detach, or

 if there is no valid subscription context for the UE in the MME, or

 if the UE provides an IMSI or

 the UE provides an old GUTI which doesn't refer to a valid context in the MME, or

 for some network sharing scenario (e.g. GWCN) if the PLMN-ID of the TAI supplied by the eNodeB is different from that of the GUTI in the UE's context, "

 

To 버너

I do not quit sure all the cases can be concluded into "if GUIT is different with MME' own"?

 

Sundar Ramaswamy 2017-04-13 15:07:54

What if a device executes PSM mode and goes to deep sleep state and wakes up to connect later. What will happen to the IP address? Also, in the case of dynamic IP allocation, is there a possibility that IP address can be changed? 

berry blacks 2017-07-02 05:03:25

in the following example, user 1 belongs to operator A. When he is on network A, the IP address is allocated by the P-GW of network A.

When he roams on network B, he may still be using the P-GW of network A which can allocate an IP address.

Question: can there be overlap of IP addresses, between a user 2 of Network B who get an IP address by P-GW(B), with user 1 on network B who got an address from P-GW(A)?
 

Srijan Singh 2017-09-26 16:46:24

@berry blacks:
As far as I know, there can be overlap of IP addresses in that P-GW of network A itself for different APNs in that PGW. What is done to overcome that is VLAN tagging at SGi interface. 

Roel Derksen 2019-02-04 22:54:07

As I understand it, the UE gets it's IP address and the DNS IP address if the device is known and reachable.

What happens to the bearer and IP address allocation of the UE when it is powered down or is no longer reachable? Are there timers on network side to re-allocate the used IP address? 

monisah 2019-02-18 21:41:21

Where do i search how many PDN connection does the UE have in wireshark

nirav kapoor 2019-04-09 17:41:46

Dear Netmanias Team,

I had referred to the material LTE IP Address Allocation Schemes I: Basic,  it seems only HSS subscription profile is mentioned for statis UE IP allocation, can you please elaborate on the PDN GW Allocation as well during static IP allocation.

Static UE IP can be allocated only if PDN GW is statically assigned to the particular user every time it attaches.

 

Regards,

Nirav Kapoor

Steven Yuan 2019-09-27 16:36:09

Is the IP address a common IP, can it be seen out of LTE network?

Jon Gettys 2020-04-29 21:26:47

Shouldn't starting address in IP pool be 1.1.0.1 and not 1.1.1.1?

Thanks

Mahmoud Maher 2020-07-21 19:50:59

Thanks for this comprehensive article ..

i need to know the cases inwhich the UE will be re-assigned with new IP address ? 

is it only when attaching to the LTE network , or it can be assigned with new IP address incase of inter rat ? 

 

Abhinav 2020-11-02 22:16:27

Is it possible to configure 4 DNS IPs in APN and assign 4 DNS IPs to UE ?

Radek Drimec 2021-08-13 21:43:00

Hello guys,

 

nice diagram and explanation. I have just additional question. When static alocation for PDN-type IPv4/IPv6 is required, does HSS needs to provide both IPs or IPv6 can be alocated localy on PGW?
Thanks for answer.

vikas 2021-09-12 13:13:17

in static IP address allocation does it require ULR every time? if user already having its location updated and seating idle and then asks for PDN connection, how IP allocation(static) will happen in this case.

david 2021-09-14 04:15:35

There are multiple IP addresses mentioned in this article to know how to change my ip address on my phone. The first one is a Public IP address is also referred to as an external IP address, which is the address that is designated to your device.
<a href="https://technumus.com/change-my-ip-address-on-my-phone/">change my ip address on my phone</a>It changes every time we tend to establish a new network connection for the device. This is the technique through which your device communicates with networks outside of your own. Secondly, Private IP addresses are the ones that cannot be linked with external networks, although a private IP address is what our devices use to link on private networks. 

 

smw 2022-04-18 18:17:46

i  wonder   whether  the   assigned   ip  addrass   belong  to  oprators  privite  addess  space  or   the  address  space   of   PDN    ue   want  to access  

정병우 2022-05-11 11:58:06

When requesting and receiving an IPv4 address, the UE receives only an IP address without subnet mask information. What subnet mask should be used when operating as a 5G router and setting the received IP on the interface?

정병우 2022-05-11 12:00:49

IPv4 주소를 받는 경우, Subnet mask 정보 없이 IP 주소만 받게 되는데, 5G Router로 동작하여 Interface에 해당 IP를 설정해야 하는 경우에 어떤 Subnet Mask를 사용해야 하나요? 규격에도 Mask에 대한 내용은 못찾겠던데요.

용숙이 2022-05-16 10:25:10

이동통신망에서 subnet mask라는 개념이 필요할까요?

Thank you for visiting Netmanias! Please leave your comment if you have a question or suggestion.
Related Contents
02/17/2015
Netmanias Technical Documents
10/22/2013
Netmanias Technical Documents
08/26/2013
Netmanias Technical Documents
08/20/2013
Netmanias Technical Documents
08/05/2013
Netmanias Technical Documents
07/31/2013
Netmanias Technical Documents
 
 
 
 

[HFR Private 5G: my5G]

 

Details >>

 

 

 

     
         
     

 

     
     

Subscribe FREE >>

Currently, 55,000+ subscribed to Netmanias.

  • You can get Netmanias Newsletter

  • You can view all netmanias' contents

  • You can download all netmanias'

    contents in pdf file

     
     

 

     
         
     

 

 

 

View All (179)
5G (8) 6G (1) Backbone (2) Backhaul (3) Blockchain (1) CDN (1) Carrier Ethernet (3) Charging (1) Cloud Native (1) Core (1) DHCP (4) ECM (2) EMM (16) EPS (2) Google (1) HLS (1) HTTP Adaptive Streaming (3) Handover (5) IPTV (4) Initial Attach (2) IoT (2) Korea (1) LTE (39) LTE Identification (2) LTE-A (1) MPLS (2) Mobility (2) NAT (7) Netflix (1) Network Architecture (3) Network Protocol (20) New Radio (1) OTT (1) PCRF (3) QoS (3) RCS (3) SDF (2) SDN/NFV (3) SK Telecom (2) Samsung (3) Security (5) Sk Telecom (1) Transparent Cache (1) Video Streaming (4) VoLTE (2) Wi-Fi (1) YouTube (2)
Password confirmation
Please enter your registered comment password.
Password