Home | Reports | Technical Documents | Tech-Blog | One-Shot Gallery | Korea ICT News | Korea Communication Market Data | List of Contributors | Become a Contributor |    
 
 
Section 5G 4G LTE C-RAN/Fronthaul Gigabit Internet IPTV/Video Streaming IoT SDN/NFV Wi-Fi KT SK Telecom LG U+ Network Protocol Samsung   Korean Vendors
 
Real World Private 5G Cases   4 Deployment Models On-Premise Cases 5G Core Control Plane Sharing Cases

5G Core Sharing Cases

   
 
Private 5G Deployment   • Private 5G Frequency Allocation Status in Korea  South Korean government's regulations on private 5G and KT's strategy for entering the market
Cases in Korea   Private 5G Operators |   SK Networks Service (SI) Sejong Telecom (Wire-line Carrier) KT MOS (Affiliate of KT) • Newgens (SI) • NAVER Cloud more >>  
    Enterprise DIY |   Korea Hydro & Nuclear Power (Power Plant) Korea Electric Power Corporation (Energy) • Republic of Korea Navy more >>
 
CHANNELS     HFR Private 5G Solution (my5G)       my5G Solution Components       my5G Key Features        my5G Resources        my5G News          
 
banner
banner
SD-WAN traffic path control and WAN quality enhancement solutions by vendor: (2) Citrix
July 19, 2017 | By Dr. Harrison J. Son @ Netmanias (tech@netmanias.com)
Online viewer:
Comments (1)
12
     
 

Last time, we explored SD-WAN by Silver Peak (visit here). Today, we will discuss some key features of Citrix’s SD-WAN.
 

1. Network Measurement
 
One of the key roles of SD-WAN is to measure the quality of underlay network paths and, based on the results, determine the best paths to use for delivery of each packet. 
 
Citrix’s SD-WAN CPE (CloudBridge ) performs real-time, one-way quality measurements of multiple WAN paths. A sending SD-WAN CPE attaches a tag containing <timestamp, sequence number> to each packet (user packet).
 

Then the receiving SD-WAN CPE reads this Tag to check the quality information of the path like latency, jitter and packet loss. This quality information is updated every time each packet arrives. The receiving CPE provides the sending CPE with feedbacks based on this quality information. During this basically passive monitoring process, all packets exchanged by users are monitored and measured for quality assessment. If there is no user packet (i.e. idle link), 20 health check packets (probe) are sent per second (active monitoring). 
 


 

2. Latency-aware Path Selection
 
To high-priority applications (e.g. real-time applications like VoIP, Skype and video conferencing), WAN paths with low-latency are assigned. For delivery of high-priority application traffic, SD-WAN CPE selects a path with the lowest latency of the moment. In the example below, MPLS path was chosen for VoIP traffic because it had the best latency of the moment.

 

 


3. Dynamic Path Switching as Network Quality Changes

 
If MPLS path experiences quality degradation during a VoIP call, for example due to excessive jitter or packet loss, the sending SD-WAN CPE sends the packets to another path with the best quality available of the moment.

 

In the picture below, VoIP packets were initially sent via MPLS, but then via Internet when quality degradation is detected in the MPLS path. Then again, when the quality in the Internet path is degraded, the path is switched back to MPLS.

 

The sending SD-WAN CPE dynamically keeping switching paths, ensuring the VoIP packets are delivered through the path with the best quality possible at all time during the call. 
 


 

4. Bond Multiple Links
 
To achieve maximum possible upload/download speeds, Citrix offers a bonding feature that allows packets in a single flow to be delivered through multiple paths. For instance, with this bonding is enabled, when a branch office uploads a file containing packets 1 and 2, packet 1 can be sent through the MPLS path while packet 2 delivered through the Internet path.

 


 


5. Packet duplication for real-time application
 
Applications like VoIP and Skype are highly sensitive to latency and packet loss. Especially, packet loss can be critical because typically VoIP bearer traffic is UDP and so there is no re-transmission.

 

Even if packets can be re-transmitted in application layer, that means nothing or little as these applications are real-time application.

 

Packet loss directly leads to interruption in voice calls. To address this issue and ensure un-interrupted delivery of these sensitive application traffic, Citrix supports Packet duplication, which allows the sending SD-WAN CPE to make copies of packets, send each copy through two WAN paths.

 

Upon receiving, the receiving SD WAN CPE simply takes the first packet that arrives, and discards the one that comes later.
 
There is no or little chance of both of paths experiencing packet loss, this solution gives near-zero loss, as claimed by Citrix. Also, because what arrives first is taken wherever they are from, greater performance in terms of latency can be achieved compared to using a single path.

 

 


6. Unidirectional Path Selection
 
In typical SD-WAN implementation, once a path is determined for an application, both upstream and downstream traffic for the application are delivered via the same path.
That is, as seen in the picture below, once MPLS is chosen, traffic travels through MPLS in both directions.
 

 
In the picture below, the two paths between the HQ and BO, MPLS and Internet, may have different quality in each direction. For example, at any given time, Route 1 (BO ->MPLS->HQ) can have pretty good quality while Route 2 (HQ->MPLS->BO) experiences congestion, or vice versa.
 
With Citrix’s SD-WAN, traffic of an application, upstream or downstream, can be delivered through either WAN path. For instance, in the example scenario below where traffic is light in Routes 1 and 4, but heavy in Routes 2 and 3, Citrix’s SD-WAN automatically selects MPLS path for traffic traveling from BO to HQ, and Internet path for traffic from HQ to BO. Then as the network quality of the four paths changes over time, it dynamically switches paths accordingly.

 

 


What has come to my mind while exploring solutions by SD-WAN vendors was “Wow, they really do whatever they can, and are determined to try anything plausible.”
 
After all, it’s
software-defined. So sky is the limit. And that’s the beauty of SD-WAN.

 

 

 

See Also, Comparison of the SD-WAN vendor solutions, Netmanias One-Shot

 

 
     

 

Ganesh kadam 2017-08-18 23:38:53

Thanks for the deatils explaination DPS, path selection and very useful comparision sheet... really appreciated...!!

Thank you for visiting Netmanias! Please leave your comment if you have a question or suggestion.
Related Contents
 
 
 
 

[HFR Private 5G: my5G]

 

Details >>

 

 

 

     
         
     

 

     
     

Subscribe FREE >>

Currently, 55,000+ subscribed to Netmanias.

  • You can get Netmanias Newsletter

  • You can view all netmanias' contents

  • You can download all netmanias'

    contents in pdf file

     
     

 

     
         
     

 

 

 

View All (854)
4.5G (1) 5G (101) AI (7) AR (1) ARP (3) AT&T (1) Akamai (1) Authentication (5) BSS (1) Big Data (2) Billing (1) Blockchain (3) C-RAN/Fronthaul (18) CDN (4) CPRI (4) Carrier Ethernet (3) Charging (1) China (1) China Mobile (2) Cisco (1) Cloud (5) CoMP (6) Connected Car (4) DHCP (5) EDGE (1) Edge Computing (1) Ericsson (2) FTTH (6) GSLB (1) GiGAtopia (2) Gigabit Internet (19) Google (7) Google Global Cache (3) HLS (5) HSDPA (2) HTTP Adaptive Streaming (5) Handover (1) Huawei (1) IEEE 802.1 (1) IP Routing (7) IPTV (21) IoST (3) IoT (56) KT (43) Korea (20) Korea ICT Market (1) Korea ICT Service (13) Korea ICT Vendor (1) LG U+ (18) LSC (1) LTE (78) LTE-A (16) LTE-B (1) LTE-H (2) LTE-M (3) LTE-U (4) LoRa (7) MEC (4) MPLS (2) MPTCP (3) MWC 2015 (8) NB-IoT (6) Netflix (2) Network Protocol (21) Network Slice (1) Network Slicing (4) New Radio (9) Nokia (1) OSPF (2) OTT (3) PCRF (1) Platform (2) Private 5G (10) QoS (3) RCS (4) Roaming (1) SD-WAN (17) SDN/NFV (71) SIM (1) SK Broadband (2) SK Telecom (35) Samsung (5) Security (16) Self-Driving (1) Small Cell (2) Spectrum Sharing (2) Switching (6) TAU (2) UHD (5) VR (2) Video Streaming (12) VoLTE (8) VoWiFi (2) Wi-Fi (31) YouTube (6) blockchain (1) eICIC (1) eMBMS (1) iBeacon (1) security (1) telecoin (1) uCPE (2)
Password confirmation
Please enter your registered comment password.
Password