Home | Reports | Technical Documents | Tech-Blog | One-Shot Gallery | Korea ICT News | Korea Communication Market Data | List of Contributors | Become a Contributor |    
 
 
Section 5G 4G LTE C-RAN/Fronthaul Gigabit Internet IPTV/Video Streaming IoT SDN/NFV Wi-Fi KT SK Telecom LG U+ Network Protocol Samsung   Korean Vendors
 
Real World Private 5G Cases   4 Deployment Models On-Premise Cases 5G Core Control Plane Sharing Cases

5G Core Sharing Cases

   
 
Private 5G Deployment   • Private 5G Frequency Allocation Status in Korea  South Korean government's regulations on private 5G and KT's strategy for entering the market
Cases in Korea   Private 5G Operators |   SK Networks Service (SI) Sejong Telecom (Wire-line Carrier) KT MOS (Affiliate of KT) • Newgens (SI) • NAVER Cloud more >>  
    Enterprise DIY |   Korea Hydro & Nuclear Power (Power Plant) Korea Electric Power Corporation (Energy) • Republic of Korea Navy more >>
 
CHANNELS     HFR Private 5G Solution (my5G)       my5G Solution Components       my5G Key Features        my5G Resources        my5G News          
 
banner
banner
LTE Policy and Charging Control (PCC)
August 22, 2014 | By Netmanias (tech@netmanias.com)
Online viewer:
Comments (27)
34
SUMMARY
This document will describe Policy and Charging Control (PCC) rules and PCC procedures to be performed based on these rules. It will review PCC procedures required for using Internet and voice services on LTE networks, and also how “Policy Control” is performed depending on different PCC rules applied.
Page 1 of 6
 
     

Table of Contents  

1. Introduction
2. PCC Rules

3. PCC Procedures

4. How Policy Control Affects the Way IP Packet Flows are Handed

5. EPS Entity Information

6. Closing

 

 

1. Introduction

 

To use LTE services, a user must purchase an LTE device, sign up for an account with his mobile operator, and then select the service types and plan he wants. Then, to support and manage the selected services, the operator configures a subscription profile based on his subscription information. When the user uses LTE services, an EPS session is established (or modified) to each Access Point Name (APN) associated with different services selected. In the meantime, the network determines a policy on how network resources are to be allocated and how services are to be charged when an EPS session is established or modified. Then, it applies the policy to the EPS session while the session remains active. This procedure is called Policy and Charging Control (PCC), and is mainly taken care of by entities like Policy and Charging Control Function (PCRF) and Policy and Charging Enforcement Function (PCEF)1.

 

When an EPS session is established or modified, PCRF determines a PCC rule for each Service Data Flow (SDF) based on the operator’s policy (e.g. QoS policy, gate status, charging methods, etc.). PCEF (P-GW) detects an SDF, and applies a PCC rule that is specific to the particular SDF to the user packets in it. It also binds the SDF QoS and bearer QoS, and applies the bearer QoS to the EPS bearer(s). That is, EPS bearer contexts are set or modified at EPS entities (UE, eNB, S-GW, P-GW, and MME).

 

Establishment, modification and termination of an EPS session are performed in accordance with the PCC procedure. EPS session modification procedure may include establishment, modification or termination of an EPS bearer. During this procedure, EPS bearer contexts between UE and MME are processed by EPS Session Management (ESM) function in NAS layer.

 

This document discusses PCC rules and procedures, and is organized as follows:

 

Chapter 2 defines PCC rules, and describes how PCC rules are provisioned over the Gx interface for different service types.

Chapter 3 explains PCC procedures required for EPS session establishment and modification, along with ESM procedures.

Chapter 4 explores how IP packet flows are handled when policy control is applied, and

Chapter 5 summarizes information related to policy control held by EPS entities.

 

 

Page 1 of 6
Emmanuel Pattinson 2014-08-31 18:56:31

Thanks Netmanias, truly appreciate your efforts in preparing this document.

 

Any update on Online and Offline charging. (OCS and CGF)???

 

Thanks mate!!!

 

Raj 2015-11-28 15:24:51

Who assigns the Dedicated bearer ID ? not clear from document. Is it MME or PGW

Chris 2015-11-28 17:24:43

@Raj, MME assigns the EPS Bearer ID (EBI) for both default and dedicated bearer.

Saurabh Thukral 2014-09-23 16:20:46

refer Figure 4.

 

An important parameter missing in the call flow for voice call modification procedure i.e setup of dedicated bearer is LBI. Please add this parameter

Netmanias 2014-10-10 18:40:32

Hi Saurabh, 

 

Thank you for the comment. We have added EPS bearer related IDs to Figure 3 and 4 (Default Bearer ID in Figure 3, and Dedicated Bearer ID and LBI in Figure 4), and the related STEPs have been modified (STEP 2) in Section 3.1, and STEPs 6) ~ 7) in Section 3.2).

 

We omitted EPS Bearer IDs and LBI to simplify the figures because the IEs are mentioned often in other LTE TRs. But, as you pointed out, LBI is important parameter when a dedicated bearer is created, so it seems better to add them. Thank you for your careful comment. 

 

Abhishek Jadhav 2014-09-27 13:45:33

It is clear realization of technology

Thank you very much

Lavanya Sabhapathi 2014-10-09 13:26:30

Thank you so much for sharing wonderful document which made me to understand about default and dedicated bearer. If you can plz share about messages like ASR STR clearly

Harry 2014-10-24 04:01:29

Thank you so much for this excellent document.


What is unclear to me is, in case of PCC rule with closed gating status, whether or not the gating-status is delivered to SGW and/or UE as part of TFT template. I'd like to understand where the blocked uplink packets are discarded. (PGW or SGW or UE?)


Thanks again.


Vicent Ferrer Guasch 2014-10-29 00:57:47

Hi,

 

First of all, congratulations for all these amazing LTE technical documents. They are really clear and helpful in order to understand the complexities of LTE, in addition to a nice quick reference. Thanks a lot for sharing.

 

I have a question about figure 6. The Bearer ID for both Default bearers is 5, is that correct or is it a typo? Is it possible to reuse the Bearer ID for different APNs?

 

According to TS 23.401 clause 5.2.1,  "An EPS bearer identity uniquely identifies an EPS bearer for one UE accessing via E-UTRAN"

 

Is there any limitation on the number of Default Bearers that can be stablished, apart from the 11 Bearer IDs available?

Netmanias 2014-11-01 10:19:09

Hi Vicent,


It’s typo error. As you have mentioned, different bearer id is allocated to each bearer for an UE. We have corrected the typo in Figures 6 and 7 and updated this post and pdf file. Thank you for letting us know that. 


We are not sure about the maximum number of default bearers for an UE, but it may depends on the number of PDNs the UE can be connected to. Some eNBs/femto APs have been implemented to support only a limited number of PDNs. 



Antti Mikola 2014-11-05 02:19:35

Hello,

 

Thank you for this informative document.


I have a question concerning the dedicated bearer creation. Can two bearers with the same QCI values but different ARP values exist at the same time? For example, concider the following scenario. A new PCC rule is authorized with a certain QCI and ARP values. If a bearer with the same QCI but with a different ARP value already exist, can the PCC rule be mapped into this bearer or is a new bearer with same QCI but different ARP value created?

radhi 2015-03-24 19:57:34

No, Bearer is uniquely identified by the combination of QCI and ARP. So even if ARP is different, dedicated bearer creation will  be triggered by PCEF.
 

pri 2014-12-18 23:31:51

How does the PCRF store the PCC Rules (based on what index). I mean lets say same QOS is applied 

for two Applications (mapped to SDF1 and SDF2, both mapped to dedicated bearer id 1. 

So lets say the App related to SDF#1 is stopped. Then PCRF needs to delete PCC Rule related to SDF#1. 

But the rule is still valid for SDF#2. Any pointers on how this is implemented in PCRF. 

It will be great if you can give some practical example (with just 1 or two rules in PCRF) . 

Also what will be sent in the Diameter messages esp in Gx interface... Also may be bit about Rx interface ?

vikas singhal 2015-03-30 18:14:52

Hello,

 

Thanks for such detailed documentions, I guess there is a typo in Figure 6. For PF1 of Deafult bearer (DL), SDF id is written as SDF2 which should be changed to SDF1.

ashish12784 2015-08-08 19:15:13

I have some doubts related to section 3.1.


1. Suppose UE have configured multiple apns (internet.apn.com, ims.com) for internet and ims services. UE is switched on,   shall it create eps session with both the apns or any of default apn (internet) and eps session with ims once UE attempt any voip call?

2. Suppose there is only single apn (ims.com) is configured in UE, Is pdn connectivity request need to send from UE to MME or attach shall be sufficent?

3. As per my understanding,  there is one eps session for each apn. Shall the eps sessions share the same GTP tunnel or mutiple gtp tunnel shall be created per eps session? 

버너 2015-09-01 06:45:59

regarding to 1)

After UE is switched on, two default eps bearers are created and kept alive.

- Default eps session for internet APN which can be removed

  if you enable WiFi instead of LTE data service at the UE 

- Default eps session for IMS APN which is used

  for initial / periodic registration to IMS (SIP REGISTER to CSCF)

  and also for receiving call (waiting of SIP messages from IMS, e.g. SIP INVITE)

- Dedicated eps bearers for IMS APN to carry RTP will only be created and maintained

  while VoLTE calling

 

regarding 2)

Sorry, I don't understand your question, "pdn connectivity request" is used for initial attachment.

If you are considering about creation of dedicated bearers for IMS APN, dedicated bearers are created only by IMS

- Initiated by CSCF -(Rx)-> PCRF -(Gx)-> PGW -(S5)-> SGW -(S11)-> MME -(S1)-> eNB/UE

 

regarding 3)

- Yes if "multiple PDN" is not used

  (As I know "mutiple PDN" is defined but not serviced by any operators)

- A GTP tunnel can not be shared by several eps sessions

- One EPS bearer is made up of one GTP tunnel and several SDF templates

- Please see following articles

- https://www.netmanias.com/en/post/techdocs/5907/identification-identifier-lte/lte-identification-iii-eps-session-bearer-identifiers

- https://www.netmanias.com/en/?m=view&id=blog&no=5932

Sanjay 2016-09-27 20:12:49

 

Thanks a lot Netmanias, it is truely an excellent informative site.
I have one quiery, As we understood, we need a default bearer and dedicated bearer to IMS for the voice call, how many bearer we need for a normal internet usage ? As internet will be a separate PDN/APN.

Sanjay 2016-09-27 21:16:42

I got the answer for my query...I didnt read all the pages while asked this query..

sowjanya 2016-11-07 19:20:53

May I know the difference between EPS bearer QOS and subscriber's allowed QOS?

asfli asdf 2017-04-04 19:02:54

Hi

Thanks for your useful posts.

I had a question about "Default Bearer Establishment" (Section 3.1, Figure 3). In step 10 and 11 the MME and UE are informed about QoS parameters (such as QCI), however, the S-GW and eNodeB are not informed by anyone. As I know S-GW and eNodeB are envolved in policy enforcement process, so how they are informed about policy?

MANJULA R 2019-03-25 11:05:31

Hi,

  very usefu posts, 

I have a question regarding dedicated bearer , if there are more than one QCI 1 profile with different ARP values how PCRF picks the correct profile for a particular subscriber.

example if i have to prioritise some subscribers over others with same IMSI.

one way i undersatnd is to differentiate based on IMSI, but in case if its same IMSI and two profiles with different ARP values for QCI1.

 

manjunath UH 2019-12-20 17:40:30

Hi,

1) If UE have Multiple APN's, then whcih one select by PGW..

2) Diffrence b/w UE- AMBR & APN- AMBR

3) In whcih message PGW alocates IP to UE...

Tsvetan Filev 2020-04-29 00:58:38

Hi. Great article.

I have one quick question: How does the PGW (PCEF) bind the PCC rule to a given UE/bearer ?
Does it use UE IP from the SDF (DL/UL) and searches in the list of active bearers ?

prashant mundepi 2020-05-14 16:49:01

Hi, thanks for the great explanation !
 

is it possible to establish both the default and dedicated bearers during the initial attach?  Its a requirement from an operator.

chandan dubey 2020-09-17 20:09:42

Hi Prashant,

Dedicated bearer is created only when condition is default must establish first ....

SCHIPPERS 2022-01-06 02:49:38

Hello,  very usefull document,

I have a question and cannot understand when you mention "(UE IP, *, RTP, *, UDP)/(*, UE IP, RTP, *, UDP)": 

What means the "*"?  is this the Port number ?   

And for the DL part shouldn't it be  "(*, RTP, UE IP, *, UDP)" instead of "(*, UE IP, RTP, *, UDP)" ?  

 

thank you very much !!

Umesh Patel 2022-02-28 18:05:11

Hello Netmanias,

Can you share details information about OCS (Onlice charging) 

Thank you for visiting Netmanias! Please leave your comment if you have a question or suggestion.
 
 
 
 

[HFR Private 5G: my5G]

 

Details >>

 

 

 

     
         
     

 

     
     

Subscribe FREE >>

Currently, 55,000+ subscribed to Netmanias.

  • You can get Netmanias Newsletter

  • You can view all netmanias' contents

  • You can download all netmanias'

    contents in pdf file

     
     

 

     
         
     

 

 

 

View All (181)
5G (9) 6G (1) Backbone (2) Backhaul (3) Blockchain (1) CDN (1) Carrier Ethernet (3) Charging (1) Cloud Native (1) Core (1) DHCP (4) ECM (2) EMM (16) EPS (2) Google (1) HLS (1) HTTP Adaptive Streaming (3) Handover (5) IPTV (4) Initial Attach (2) IoT (2) Korea (1) LTE (39) LTE Identification (2) LTE-A (1) MPLS (2) Mobility (2) NAT (7) Netflix (1) Network Architecture (3) Network Protocol (20) New Radio (1) OTT (1) PCRF (3) Private 5G (1) QoS (3) RCS (3) SDF (2) SDN/NFV (3) SK Telecom (2) Samsung (3) Security (5) Sk Telecom (1) Transparent Cache (1) Video Streaming (4) VoLTE (2) Wi-Fi (1) YouTube (2)
Password confirmation
Please enter your registered comment password.
Password